Of course, something that clipped over the existing jaws would be even easier still, though a little less flexible (in both good and bad ways). The software provides 2 major functions, 1 Slicing 3D models and send the data to Cetus printer for printing. ![]() A set of chuck jaws would do just as well, and be easier to use. I was thinking of printing out some single-use collets, jut bore, trim off the nose (that keeps the slits apart), and use as needed. Print speed in the Cetus software can be set to Fine, Normal or Fast. Also while in that menu, ensure it's set to the right nozzle. Change the material in the Maintenance menu to Customized and set up an alternate PLA setting. Once it was all figured out, it would be near zero effort to print out another set for whatever. The build volume is a modest 180mm x 180mm x 180mm that relative to the size and weight (12.1 lbs) of the printer is an amazing ratio. First, lower the temp to 200c, or even 195. Maybe leave them a little snug in the slides to they're easy to bore out to whatever size is needed. JonCan't say as I'd be worth the effort to print out a whole chuck. I posted it on the Facebook support group first for feedback. There have been some people asking questions about it here, so I thought this may help someone searching for more info. Oh, another benefit of PETG, superior layer adhesion I finally finished up my review on the Cetus3D Printer yesterday. Thanks to Durwin Pye for cleaning the scad. Actual Size Online Ruler (inches, cm/mm) measure something on-screen measuring tool in inches/centimeters Calibrate If you want to measure the actual size of a small object in inches or centimeters and you don’t have a real ruler at hand, this virtual on-screen online ruler will help you. ![]() If I can tidy it up I will post at a latter date-DONE I have not included the Scad file at the moment, as it is a real mess, Thanks to MrArrow1961 for the reverse jaws /thing:624814 3rd, ok but tend to over tighten, which could break the scroll I have printed and tested (sort of) different jaw materials And added photosįlexi at 85% infill. Parametric Involute Bevel and Spur Gears by GregFrost Many measurements can be taken by simply mousing over the object. I have added it to the list of files -not for the faint of heart-Īfter printing some other designs and finding they did not work for me, I decided to have a go myself, So here it is, Please beware, I have made allowances for my own printer so I take no resonsibility if it doesnt work for you.Īlso, to state the obvious, this is a plastic chuck, it has its limits!.ġ01mm diameter, 59mm thick plus 25mm jaw height. Durwin Pye has sorted out the Scad file so it is now brilliant, Thanks,
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |